New K&M products NAMM Show 2020
18828 Basic support »Omega« Table stand
(ONLY IN CONNECTION WITH THE STACKER 18811)
With the help of this basic support, the stacker 18811 can be converted into a complete keyboard table stand in no time at all. The width of the complete table stand can be adjusted in five steps from 526 to 770 mm. Additionally the depth of the upper support arms of the attachment can be adjusted in 4 positions enabling a free view of the lower keyboard. The 18811 stacker can also be adjusted flexibly in height and incline. The 18819 tray is optionally available as a support for smaller electronic equipment. Self-adhesive rubber pads prevent the instruments from scratching or slipping. On request, the table stand can be extended to a third level with the stacker 18822.
11505 Sheet music and document holder
Large foldable sheet music holder with a steel extension arm, to be screwed onto vertical stand tubes. The clamping range for the tubes lies between ø 11 and ø 30 mm. The distance of the sheet music holder to the stand tube can be steplessly adjusted on the extension arm ranging between 185 and 265 mm. The sheet music holder is clamped and aligned by means of a handy wing nut. For transport, it can be folded and retracted to save space.
12227 Tray
Practical tray that can be attached to all stands with a tube diameter of 25 to 42 mm. The usable tray area is 250 x 330 mm and is ideal for smaller electronic devices such as mixers, controllers or tablets. An additional recess in the plate ensures convenient cable routing. Another useful feature is the can/cup holder. The robust steel construction is ideal for percussion and other music accessories. A foam insert dampens vibrations and prevents unpleasant background noises. The distance to the stand as well as the orientation of the plate can also be individually adjusted.
18997 Keyboard stand
This X-stand made of aluminium is lightweight and yet extremely stable. The arrangement of the double-braced stand tubes provides noticeably more stability and safety. The ergonomic clamping lever allows a quick and easy mounting or folding in no time at all. The sturdy metal joint is finely interlocked and adjustable in 5° steps enabling several different positions. With the help of a scale you can quickly find your preferred position again. The two rear rubber pads can be moved axially and can therefore be perfectly adapted to the width of the keyboard. The maximum tray depth is 350 mm. The typical quality features of K&M such as solid workmanship, high-quality finish and an adjustable rubber end cap for uneven floors complete the overall concept. The attachment 18941 offers the possibility to extend the stand for a second keyboard.
18827 Stage piano support for »Omega«
The short version of support arms for »Omega« keyboard stands 18800, 18810 and 18820. The length of the support arms is only 264 mm and is therefore ideally suited for stage pianos and keyboards with a small depth. The large round rubber pads ensure a secure and anti-slip hold.
18807 Universal holder
The practical universal holder opens up new application possibilities for the »Omega« 18810 and 18820 keyboard stands as well as for the 18950 and 18953 table-style keyboard stands. The holder is steplessly adjustable in height and distance and can be mounted individually on any supporting leg of a keyboard stand. As an option K&M offers the sheet music holder 18805, various tablet PC holders as well as all common microphone boom arms.
18863 Laptop rest for the »Spider Pro«
Appealing laptop attachment for »Spider Pro« and »Baby Spider Pro«. The laptop rest is mounted on the upper end of the keyboard stand »Spider Pro« or »Baby Spider Pro« by means of a wing nut and retaining plate. The aluminium shelf can be adjusted horizontally or inclined in three positions. Individually adjustable stop pins with rubber caps enable the use of all common laptop models, mixers, etc.
24623 Distance rod
Steel tube combination for use with various base plates. With threaded bolt M20 for screwing in. Extension tube with diameter 35 mm to accommodate loudspeaker cabinets with flange socket. Height adjustable by means of a locking bolt and safety screw. The integrated threaded socket M10 allows the mounting of a crossbar or the direct attachment of spotlights.
24623 Distance rod
Steel tube combination for use with various base plates. With threaded bolt M20 for screwing in. Extension tube with diameter 35 mm to accommodate loudspeaker cabinets with flange socket. Height adjustable by means of a locking bolt and safety screw. The integrated threaded socket M10 allows the mounting of a crossbar or the direct attachment of spotlights.
26706 Base plate
Heavy and solid base plate for all common distance rods and tube combinations with M20 threaded bolts. Depending on the requirements, there are three options for positioning the pedestal. In addition to the centric and eccentric position, the tube combination can also be fixed in the corner. Other useful features are a practical carrier handle, cable bushing and four sturdy feet with felt cover.
26706 Base plate
Heavy and solid base plate for all common distance rods and tube combinations with M20 threaded bolt. Depending on the requirements, there are three options for positioning the distance rods. In addition to the centric and off-center position, the tube combination can also be fixed in the corner. Other useful features are the integrated handle, cable bushing and four sturdy felt-covered feet to prevent scratches and marks on the floor.
26709 Additional weight for base plates
Separate weight plate for speaker stands with M20 base plate. The plate has a diameter of 325 mm and a thickness of 8 mm. There is an additional bore for a cable bushing. Self-adhesive rubber buffers ensure non-slip, low-noise operation. The weight is 5 kg. The weight plate can be mounted easily without any tools.
20150 Microphone stand XL
Extra high microphone stand for special recording techniques or antenna positioning. The height ranges from 1190 to 3220 mm and can be steplessly adjusted. Full metal feet with a large footprint of ø 850 mm provide additional stability.
21471 Speaker stand
Stable and sturdy speaker stand with aluminum tubes. Reliable base tubes with 35 mm diameter and large rubber end caps guarantee a stable and safe stand. The compact clamp with the patented push-button system enables a user-friendly height adjustment of the stand. The clamping screw provides additional stability and a vibration-free hold of the speaker. Further special features are the pull-out guard for the extension tube, the integrated shock absorber and mounting aid for the speaker cabinets. The stand is foldable for easy transport.
21472 Speaker stand XL
The XL version among the speaker stands. Sturdy and stable and completely made of aluminum tubes. Solid base tubes with 35 mm diameter and large rubber end caps guarantee a stable and secure stand. In comparison to a "normal" speaker stand the root circle is much larger and amounts to remarkable 1,558 mm. The max. height reaches 2,500 mm and thus offers versatile application possibilities. The clamp equipped with the patented push-button system enables a user-friendly height adjustment of the stand. The clamping screw provides additional stability and vibration-free hold of the speaker. Further special features are the pull-out guard for the extension tube, the integrated shock absorber and a mounting aid for the speaker cabinets. The stand is foldable for easy transport. The stand can be turned into a lighting stand with suitable accessories.
19610 Adapter
Multifunctional stand adapter for mounting on stands with ø 35 mm extension tubes. The adapter can be adjusted to an inclination of +60° to -30°. The fixation follows by means of an adjustable clamping lever. The adapter plates 19615, 19616 and 19617 can be used to mount a wide variety of screens up to a mounting hole pattern of VESA 200 x 200 mm. The adapter plates 24352 to 24359 are suitable for accommodating a large number of loudspeaker cabinets.
19615 Adapter plate VESA MIS-D 75/100
Adapter plate according to VESA MIS -D 75/100 mm for wall and ceiling mounts 24471, 24481 and 24496 as well as for stand adapters 19780 and 19610.
19616 Adapter plate VESA MIS-E 200
Adapter plate according to VESA MIS-E 200 mm for wall and ceiling mounts 24471, 24481 and 24496 as well as for stand adapters 19780 and 19610.
19617 Adapter plate VESA MIS-F 200x200
Adapter plate according to VESA MIS -F 200 x 200 mm for wall and ceiling mounts 24471, 24481 and 24496 as well as for stand adapters 19780 and 19610.
66360 Connection sleeve
Reducer flange for TV pin ø 28 mm for use on all common stands with tube diameter of 35 mm. The sleeve is simply put on and fixed with a clamping screw. For lighting crossbars and individual spotlights.
