EBS adds a 1x15" bass combo to the Magni 502 series!
From now, EBS offers two models in the Magni 502 series, the 210 and the new 115 bass combo.
The Magni 502 is a super lightweight bass combo built with a wooden cabinet ported on both front and back to improve sound distribution across the room. Selected Neodymium speakers help keep the weight to a minimum while offering a transparent and authentic bass sound.
The new 115 model features a 15" speaker and a tweeter. The amplifier is based on the Reidmar 502 and can handle an extension cabinet down to 4 ohms for a total workload of 2 ohms. The lightweight power stage provides 500W RMS output power and is designed by EBS. The Magni 502 combos are switchable from 120 to 230V.
Magnificient upgrades since the previous Magni 500 series
Reduced weight by 6 kg!
Neodymium speakers with improved frequency response, power, and punch.
The power amp, developed by EBS, operates at 4 ohms and can handle a 2-ohms load. It makes it possible to extend the combo with one 4-ohm or up to two extra 8-ohm speaker cabinets.
Better suited for the road due to a new hard vinyl coating.
The woven steel grill contributes to the lesser weight and provides improved airflow.
Specifications
EBS Magni 502 - 210 & 115 models
Input Impedance: 1 Mohms // 100 pF
Character Filter:
Low +7 dB @ 40 Hz
Mid -2dB@ 800Hz
High +3 dB @ 10 kHzComp/limit:
Gain 0 dB
Attenuation max 24 dB
Compression Ratio max 3:1
Attack (80%) typ. <10 ms
Release (80%) typ. 100 msBass Filter:
Type 12 dB/oct. Shelving
Gain Range +/-18dB @ 60HzMiddle Filter:
Type Bandpass Filter
Frequency Range 100 -6.000 Hz
Gain Range +/-12-15 dBTreble Filter:
Type Shelving
Gain Range +/-18dB@6kHz
Bright: Type Shelving
Gain Range +15/-0 dB @ 10 kHzBalanced XLR output:
Output Level Nominal -10dBv
Frequency Response +0/-3 dB 10-20.000 Hz
XLR Connections 1-GND, 2-Hot, 3-Cold
Options GND Lift, Pre/Post EQEffect Loop:
Loop Signal Level nominal -10 dBv
Gain Unity (1:1)
Output Impedance 100 ohms
Input Impedance >50 Kohms // 100 pFLine out:
Output Impedance 100 ohms
Signal Level nominal 0 dBvPhones out:
Impedance recommended 32 -200 ohmsPower amp:
500 WExternal cabinet output:
The minimum Load Impedance of an external cabinet is 4 ohms
Connect via Speakon output jack.Auxiliary output:
Power Requirements max 500 W
Mains Protection: T2.5A Fuse (230V) T5A Fuse (100/120V)Cabinet:
Magni 502 - 210:
Configuration: 2x 10" Neodymium Speakers + tweeter
Frequency Response: 45 - 20k Hz
Size: (H x W x D) 56 cm / 22" / 44 cm / 17.3" / 36.5 cm / 14.4"
Weight (total): 15.4 kg / 33.95 lbs
Magni 502 - 115:
Configuration: 1x 15" Neodymium Speaker + tweeter
Frequency Response: 30 - 20k Hz
Size: (H x W x D) 56 cm / 22" / 44 cm / 17.3" / 36.5 cm / 14.4"
Weight (total): 16.5 kg / 36.37 lbs
Dust cover included.
Both units are available soon available in the Benelux!